Bio Active Septic Tank Treatment Bacteria Enzyme Dry Yeast for Septic Pallet Jack

• Environmental Protection: Yes
• Color: Brown
• Appearance: Powder
• Type: Water Treatment
• Usage: Chemical Engineering
• Market: World
• Model NO.: st
• Transport Package: 25kgs Bag or Drum
• Specification: 1kg or 25kgs
• Trademark: YUEXIANG
• Origin: China
• Production Capacity: 800t Per Month

Product Description

Process and Dosage
The product needs to be added in for two stages:
1. Start period (for septic tank only used for a short period)
Dosage form for initial stage
Tank capacity(m3) 2
YXOW-Cleaner S/T Dosage(g) 450g
water for dilute(L) 8

I:Septic tank used
For the newly started septic tank, the dosage could be deducted by 1/2 on the basis of the above list according to the actual conditions. Taking a 100m3 septic tank for example: Add 10kg first; four months later add 10kg again as per the actual demands. Three times for one year.

2.Normal service period(For septic tank already used for a long period)
Check the storage pool before using the it. Pump suction must be used providing the following conditions:
a. Solid matter exists at the top and the solid exceeding 15cm thickness;
b. The bottom with abnormal matters and the height is more than 30cm;
c. Tank PH Value: PH≥8 or PH≤6.5.
Usually the product should be added in after 2-3 weeks pump suction. The initial dosage: Dilute 1kg with 18 litre water, then add the solution into 2m3 tank.
Dosage Sheet
Tank capacity(m3):4
Dosage of YXOW-Cleaner S/T (g):900
Water for dilute (L):16
 

Tank capacity(M3)	S/T Dosage(g)	water for dilute(L)
2	450	8
3	675	12
4	900	16
5	1125	20
6	1350	24

Function
It is specialized in degrading lifeless organic wastes, changing the organic wastes including protein, starch, fat, oil, grease, tissue paper, and food residue into water, CO2, and trace minerals. It is a biological and environmental protection high-tech product and is quite effective in deodorization and decontamination.

Note:
1. For the first use of YXOW Cleaner S/T, add the product by three stages according to the dosage.
2. Usually, it is better to leave the dilute solution for 45 minutes, while the period should not exceed 1 hour (Otherwise, the bacteria will eat each other). Then mix and churn the solution and add it to the tank.

Better condition :PH value between 6-9, the temperature is between 12ºC-36ºC

In the first month, add it once a week;After 7-10 days, the color of sewage discharged from septic tanks and toilets is light yellow or close to gray and will not smell.
After the odor is reduced, add it once every half a month;
After the odor is controlled, it belongs to the maintenance stage. It is added every 1 to 3 months, and the amount added is 1/2 to 1/4 of the first time.
The dosage and frequency can be adjusted according to the site conditions